- UniMachines
- ›
- Mechanical Presses
- ›
- Eccentric Presses
- ›
- Eccentric Presses SMERAL TRNAVA
- ›
- Eccentric Presses SMERAL TRNAVA LEN 63C
Eccentric Press SMERAL TRNAVA LEN 63C
Eccentric Press SMERAL TRNAVA LEN 63C was manufactured by the machine manufacturer SMERAL TRNAVA. Machine SMERAL TRNAVA LEN 63C was built in 1978 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 1978 |
| Warranty | Without warranty |
| Technical condition | Very good |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
Technical parameters | |
|---|---|
| Maximum force (pressing) | 63 t |
| Length of the bottom working table | 800 mm |
| Width of the bottom working table | 630 mm |
| Throat depth (distance from the frame to the slider axis) | 315 mm |
| Maximum number of strokes per minute (manual work) | 50 1/min |
| Maximum number of strokes per minute (automatic work) | 130 1/min |
| Minimum length of the slider stroke | 10 mm |
| Maximum length of the slider stroke | 105 mm |
| Adjustment of the slider | 70 mm |
| Distance between frames | 355 mm |
| Compressed air pressure | 0.6 MPa |
| Machine height | 2550 mm |
| Machine length | 1425 mm |
| Machine width | 1790 mm |
| Machine weight | 5.9 t |
Equipment | |
|---|---|
| Manual control | |
| Foot control | |
| Adjustable number of strokes | |
| Bolster plate | |
