- UniMachines
- ›
- Lathes
- ›
- Vertical Turret Lathes
- ›
- Vertical Turret Lathes DEFUM
- ›
- Vertical Turret Lathes DEFUM KNA 110/135
Vertical Turret Lathe DEFUM KNA 110/135
Vertical Turret Lathe DEFUM KNA 110/135 was manufactured by the machine manufacturer DEFUM. Machine DEFUM KNA 110/135 was built in 1970 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 1970 |
| Warranty | Without warranty |
| Technical condition | Good |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Diameter of the table | 1100 mm |
| Maximum turning diameter | 950 mm |
| Maximum table load | 4 t |
| Maximum length of the vertical travel of the transverse beam | 800 mm |
| Number of the rotary speed of the table | 16 pcs |
| Minimum table rotary speed | 6.3 1/min |
| Maximum table rotary speed | 200 1/min |
| Total power demand | 30 kW |
| Maximum feed rate the transverse beam | 8.3 mm/s |
| Maximum feed rate of the carriage over the transverse beam | 31.3 mm/s |
| Length of the lathe | 2750 mm |
| Width of the lathe | 2350 mm |
| Height of the lathe | 3100 mm |
| Weight of the lathe | 11 t |
Equipment | |
|---|---|
| Technical documentation | |
