- UniMachines
- ›
- Injection Molding Machines
- ›
- Plastics Injection Molding Machines
- ›
- Plastics Injection Molding Machines Ponar-Żywiec
- ›
- Plastics Injection Molding Machines Ponar-Żywiec UT 340 T
Plastics Injection Molding Machine Ponar-Żywiec UT 340 T
Plastics Injection Molding Machine Ponar-Żywiec UT 340 T was manufactured by the machine manufacturer Ponar-Żywiec. Machine Ponar-Żywiec UT 340 T was built in 2000 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 2000 |
| Warranty | Without warranty |
| Technical condition | Good |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Clamping force | 346.7 t |
| Injection capacity | 1612 cm3 |
| Injection weight | 1451 g |
| Maximum distance between the plates for mounting the mold | 1375 mm |
| Length of the injection mold stroke | 675 mm |
| Height of the plate for mounting the mold | 990 mm |
| Width of the plate for mounting the mold | 990 mm |
| Distance between the columns (horizontal) | 690 mm |
| Distance between the columns (vertical) | 690 mm |
| Power of the ejector | 8.8 t |
| Screw diameter | 75 mm |
| Maximum injection pressure | 173 MPa |
| Pump power | 45 kW |
| Oil tank capacity | 750 l |
| Total power demand | 75 kW |
| Length of the stroke of the injection nozzle | 750 mm |
| Pressure of the hydraulic system | 17.5 MPa |
| Machine length | 8500 mm |
| Machine width | 2620 mm |
| Machine height | 2400 mm |
| Weight of the injection molding machine | 20.3 t |
Equipment | |
|---|---|
| NC control | |
| Mold closing system - hydraulic | |
| Horizontal injection aggregate system | |
| Automatic loader for plastic granules | |
| Cores | |
| Vibroisolators | |
| Technical documentation | |
| CE Declaration | |
